東方13-2CEPB服務平台增添縮減機模塊文件具體項目進行控製閥進行采購(重複投標)投標通知書

   2024-04-01
關鍵部分提醒:投標通知書 投標具體項目具體稱謂:東方13-2CEPB服務平台增添縮減機

投標通知書


投標具體項目具體稱謂:東方13-2CEPB服務平台增添縮減機模塊文件具體項目進行控製閥

Project Name: Dongfang 13-2CEPB Platform Additional Compressor Module Project Control Valve

投標號碼(Bid No.):0704-2440JDCP0001

 

中化建全球範圍 (這陣兒進行稱號“投標辦事處單位”)受中海原油(中國) (這陣兒進行稱號“投標人”)寄托,就東方13-2CEPB服務平台增添縮減機模塊文件具體項目所需一部分貨色及與此相關服務開展全球範圍著名投標。現三顧茅廬投標人對進行下麵貨色和服務正式提交密封投標:

CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted byCNOOC China Limited.(hereinafter referred to as “Tenderee”), intends to purchase the Goods and the relevant services required under the project of Dongfang 13-2CEPB Platform Additional Compressor Module Project by International Competitive Bidding. Bidders are kindly requested to provide the following Goods and services with sealed bids.

 

1.投標具體條件

Bidding Conditions:

具體項目大概:東方 13-2 CEPB服務平台是關於一座 8 腿輸油管架中心服務平台。本具體項目有必要在東方 13-2CEPB 增添 3台潮濕預縮減機、3台潮濕縮減機、1台幹滾壓縮機,並對與此相關提供配套支持配套設施開展升級改造。

Project Summary:The Dongfang 13-2 CEPB platform is an 8-leg jacket center platform. The project requires adding 3 wet gas pre-compressors, 3 wet gas compressors and 1 dry gas compressor in Dongfang 13-2CEPB, and the related supporting facilities are reformed.

資本落實到位或資本策源地按照要求具體執行狀況:已按照要求具體執行。

Source of Funds: yes

具體項目已具有投標具體條件的作出說明:已具有。

Description of Prepared Bidding Conditions: yes

 

2.投標具體內容:Bidding Contents:

貨色具體稱謂:進行控製閥

Name of Goods: Control Valve

 

數額:進行控製閥18套、自力式調整閥2套

Quantity: Control Valve18sets、Self-actuated Pressure Regulator 2 sets

 

重點技術規格:

進行控製閥:閥門度量衡1"- 10",壓強等級提升150LB - 900LB

Control Valve:Body size 1"- 10" , Pressure rating 150LB - 900LB

自力式調整閥:閥門度量衡2",壓強等級提升150LB

Self-actuated Pressure Regulator:Body size 2" , Pressure rating 150LB

 

寄遞期:2024年8月30近日

Delivery Schedule:Before 30,8, 2024

 

寄遞所在地:貸方進行指派的中國大陸渡輪碼頭或建設所在地

Destination of delivery:Domestic terminal or construction site designated by the Purchaser

 

3. 對投標人的輩數兒和功績具體要求:

Requirements for Qualification and reference of Bidder:

 

(1)輩數兒具體要求

Requirements for Qualification of Bidder

 

A.在滿足相關條件時投標人工境內計數器公司,投標人需給予法定切實有效的企業保證人運營授權、稅捐計數器證及安排單位源代碼證或證照統一的運營授權;

在滿足相關條件時投標人工境外計數器公司,需給予切實有效的公司計數器計數器證明書;

A.The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combinedcertificate and business license;

The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.

 

B.進行接管辦事處

B.Bid by Agent is accepted.

中國大陸產品不決定辦事處商投標,境外產品進行接管辦事處商投標。境外產品采用辦事處商投標時,投標人應取得此次投標所加以投產品境外製造商的可以,持續並提供該產品的法定左不過且在切實有效期內的辦事處進行核準書。

Agents are not allowed to bid for domestic products, and agents are allowed to bid for overseas products. If the bidder is an agent, bidder shall obtain the legal and only formal authorization from the manufacturer of the goods to provide the goods for this bidding,and the certificate is within the validity period.

 

C. 有沒有進行接管統一體投標:否

C.Joint Venture: Not Accepted

D.未領購投標文獻有沒有能夠參與投標:使不得以

D.Bid without the bidding documents:NOT Available

 


(2)資格條件具體要求及證明書文獻

Requirements of Qualification of Bidderand Certificate

投標人所加以投產品的取保具體要求:

Certification requirements for the products offered by the bidder:

A.中國大陸產品:麵向閥門製造的取保國別,投標產品的製造商應該獲得切實有效期內的《中中國人民共和國異常設備生產許可證》,投標時需給予證明書複製件進行詳察件(複製件複查)。

A.Domestic products: For the certification level of valve manufacturing, The manufacturer of the bid product shall obtain the validity period the《Special equipment production license of the People's Republic of China》, When bidding, it is necessary to provide a scanned copy of the original certificate (original copy for reference).

B.海外產品:麵向閥門製造的(de)取保國別,投標產品的製造商應該獲得切實有效期內的壓強彈道閥門的《中中國人民共和國異常設備生產許可證》,並借助模式進行試驗和製造開展監督進行檢查(或是進行門首更為安全使用性能開展監督進行檢查),且證明書正式批準適用範圍包含在相應範圍之內此次投標產品度量衡磅級。過渡期期內(2024年5月31日事先)未獲得以上證明書的,需給予異常設備模式進行試驗證明書(壓強彈道部件),且證明書正式批準適用範圍包括此次投標適用範圍。投標時需給予證明書複製件進行詳察件(複製件複查)。

B.Abroad products: For the certification level of valve manufacturing,the manufacturer of the bid product shall obtain the validity period the《Special equipment production license of the People's Republic of China》for pressure line valve,and passtype tests and manufacturing supervision and inspection (or import safety performance supervision and inspection),and the scope of the certificate is coveredthis bid product size andclass.If the above certificates are not obtained during the transition period (before May 31, 2024), a special equipment type test certificate (pressure pipeline components) must be provided,And the scope of the certificate is covered by the scope of the tender.When bidding, it is necessary to provide a scanned copy of the original certificate (original copy for reference).

 

(3)功績具體要求Requirement for Bidder's reference:

2013年1月1日至投標截至日(以較為條約進行簽訂時段加以為準),投標人所加以投產品的製造商應符合這陣兒功績具體要求:

From January 1, 2013 to the deadline for submission of bids (Subject to the date of signing the contract).The manufacturer of the bidder’s product shall meet the following performance requirements:

A.針對進行控製閥,應起碼具備關於兩個較為條約的進行控製閥供貨功績,且均符合閥門度量衡不不可企及6"且壓強等級提升不不可企及900LB和閥門度量衡不不可企及10"且壓強等級提升不不可企及150LB的技術具體要求,關於兩種規格閥門的供貨功績能夠為相同較為條約或老鼻子較為條約。投標人須正式提交與此相關功績證明書文獻。

A.For control valves should have at least two contract of control valve supply performance,Technical requirements of both are satisfied valve size not less than 6" ,pressure not less than 900LB, and valve size not less than 10",pressure not less than 150LB,The supply performance of the two types of valves can be the same contract or multiple contracts.the bidder shall submit relevant performance certificates.

 

B.針對自力式調整閥,應起碼具備關於兩個較為條約的自力式調整閥供貨功績,且均符合閥門度量衡不不可企及2"且壓強等級提升不不可企及150LB的技術具體要求,投標人須正式提交與此相關功績證明書文獻。

B.For self-operated control valves should have at least two contract of self-operated control valve supply performance,technical requirements of both are satisfied valve size not less than 2" ,pressure not less than 150LB, , the bidder shall submit relevant performance certificates.

功績證明書文獻包含但不禁止:1)對外銷售較為條約打印件(含與此相關技術備件)和2)到會驗光證明書文獻。投標人所正式提交的(de)功績證明書文獻一定要起碼反映這陣兒具體內容:較為條約進行簽訂時段、製造商具體稱謂、貨色具體稱謂、閥阿彌陀佛型、閥門度量衡、閥門壓強等級提升等技術具體要求及到會驗光材料。未正式提交功績證明書文獻,或所給予的功績證明書文獻束手無策反映較為條約進行簽訂時段、製造商具體稱謂、貨色具體稱謂、閥阿彌陀佛型、閥門度量衡、閥門壓強等級提升等技術具體要求及到會驗光材料的(de)均(jun1)便是較為空空功績。

Performance certificates include but are not limited to: 1) copies of sales contracts (including relevant technical attachment) and 2) prove document of arrival acceptance. The performance certificates submitted by the tenderer must at least reflect the following contents: contract signing time,manufacturer name, goods name,valve type, valve size, valve pressure rating and other technical requirements, as well as arrival acceptance documents. If no performance certificate is submitted, or the provided performance certificate fails to reflect the contract signing time,manufacturer name, goods name, valve type, valve size, valve pressure rating and other technical requirements,as well as arrival acceptance documents.it shall be deemed as invalid performance.

 

4. 有勺口兒的投標人可借助這陣兒方法得到投標文獻:從2024年4月1日進行首先至2024年4月9日止,請計數器中國海油購買業務範圍進行管理與貿易係統()的投標通知書頁麵開展選購。頭一回計數器一定要較為先進行計數器(免費教育),計數器取得成功後,可以 投標人須在線填空 投標文獻有關每套零售價為200元普通人幣或25美金,售後不退。針對采用美金 投標文獻出售花消可用於進行打印和作為投標文獻,有作為實際需要的(de)請在進行繳納時備考收件人與此相關相關信息。

 

The interested Bidders may obtain the bidding document by following method: Please login at CNOOC Procurement Operation System () on the page of Invitation for bid for purchasing Bidding Document from April 1, 2024to April 9, 2024.For the first time of login, a registration (free of charge) is needed and only after successful registration, Bidder can purchase Bidding documents online.The bidder shall fill in the registration form for purchasing bidding documents online and pay online. After successful payment, the bidder can download the bidding documents by itself. The price of each set of bidding documents is RMB200 or USD25, and it is non refundable after sales. For the bidder who purchases the bidding documents in US dollars, it is required to wire transfer to the following account number:

Payee:CNCCC International Tendering Co., Ltd.

Bank:I NDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch:

Account:0200000709117000351;

SWIFT CODE: ICBKCNBJBJM,

Bank Address:No. 237 Wang fu jing Street, Dongcheng District, Beijing, ChinaPR,100006.

 

5.
未在中國核動力投標進行采購網(www.zhuliyuan.com.cn)上計數器社員的機構應先鍵擊計數器。計數器取得成功後的在 投標社員 區依據投標通知書的認為作出說明得到投標文獻!
提供谘詢電話:010-51957458
手 機:18811547188
取得聯係人:李楊
QQ:1211306049
微信:Li18811547188
郵箱:1211306049@qq.com
策源地:中國核動力投標進行采購網
備考:欲選購投標文獻的(de)秘密投標人,計數器網站並進行薪資因特網技術及商業相關信息服務費後,檢查具體項目所有主,投標通知書並載入輩數兒原審適用範圍,資格條件具體要求,
投標列表索引,申請提出申請表等。為確保您可以較為順當投標,混凝土具體要求及選購標書進行操作操作流程按社員區投標相關信息更加具體具體內容加以為準。
修改:buy.cnooc

 
異言進行匯編 0打賞 0
 
數量更多>差不離國度可用能源
  • dlztb007
    加持續關注23
  • 投標立刻就進行首先。。。
優先推薦圖文
新式投標國度可用能源
國度可用能源國度可用能源
 
天堂视频-69av天堂在线-亚洲天堂av网-天堂影视app官方版