浙江LNG三期具體項目接受站工程超低溫要樣兒蝶閥(36寸及上述)全球範圍投標通知書(1)

關鍵部分提醒:中化建全球範圍對進行下麵產品及服務開展全球範圍著名市場競爭性投標,
中化建全球範圍 對進行下麵產品及服務開展全球範圍著名市場競爭性投標,於2023-11-30在 通知書。此次投標使用價電子投標方法,現三顧茅廬符合標準投標如意人生加投標。1、投標具體條件具體項目大概:超低溫要樣兒蝶閥(36寸及上述)資本落實到位或資本策源地按照要求具體執行狀況:已按照要求具體執行具體項目已具有投標具體條件的作出說明:已具有2、投標具體內容投標具體項目號碼:0704-2340JDCP2278投標具體項目具體稱謂:浙江LNG三期具體項目接受站工程超低溫要樣兒蝶閥(36寸及上述)項目執行所在地:中國浙江省投標產品手表(重點設備):
序號 產產品名稱 數額 著名技術規格備考
1 超低溫要樣兒蝶閥(36寸及上述) 27 台 詳細投標文獻無
3、投標人輩數兒具體要求投標人應具有的輩數兒或功績:對投標人的輩數兒和功績具體要求:Requirements for Qualification and reference of Bidder:?(1)輩數兒具體要求?Requirements for Qualification of Bidder?A.在滿足相關條件時投標人工境內計數器公司,投標人需給予法定切實有效的企業保證人運營授權、稅捐計數器證及安排單位源代碼證或證照統一的運營授權打印件;在滿足相關條件時投標人工境外計數器公司,需給予切實有效的公司計數器計數器證明書;A.The bidder within the customs territory shall provide photocopies of valid independent legal person business license, tax registration certificate, organization code certificate, or combined?certificate and business license;The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.B.居中中國人民共和國關境內製造的貨色:投標人隻得為投標設備的(de)製造商。For goods manufactured within PRC customs territory?:Bidders can only be the manufacturers of the bidding equipment.居中中國人民共和國關境外製造的貨色:投標人可為投標設備的製造商或進行核準辦事處商。For goods manufactured outside PRC customs territory:?Bidders can be the manufacturers or Authorized Agents of the bidding equipment.?在滿足相關條件時投標人工辦事處商,投標人應取得所投貨色製造商可以其為此次投標給予該貨色的(de)法定較為郎中進行核準書。If the bidder is an agent, bidder shall obtain the legal and formal authorization from the manufacturer of the goods to provide the goods for this bidding.?C. 有沒有進行接管統一體投標:否Joint Venture: Not AcceptedD. 未領購投標文獻有沒有能夠參與投標:使不得以Bid without the bidding documents:NOT AvailableE.?其他others: (2)資格條件具體要求及證明書文獻Requirements of Qualification of Bidder?and Certificate投標人應給予投標產品製造商切實有效證明證明書打印件,證明書證明的製造商具體稱謂應與其說所給予功績的製造商、這下子投標貨色的製造商保持一致。The bidder shall provide copies of the type certifications of the manufacturer when bidding. And the name of the certificates shall be the same with the manufacture of References and the manufacture of the bidding Goods.?投標產品中國大陸製造商應在投標時給予TS 證明書(異常設備生產許可證)和包含在相應範圍之內投標產品適用範圍【閥阿彌陀佛型(蝶閥)、熱度、標準及磅級】的 TSX 證明書(異常設備模式進行試驗證明書)。投標產品海外製造商應和中國大陸製造商同樣地給予以上證明書文獻,如投標人在投標時束手無策給予海外製造商的TS證明書,需在投標時給予書麵語認為函,認為具體內容為: 供貨大前提供閥門有關原產地證明書和 2024 年 5月 31 大前提供 TS 證明書 (異常設備生產許可證),認為函說明書詳細備件17。Domestic manufacturers should provide TS certificate (Special Equipment Production License) and TSX certificate (Special Equipment Type Test Certificate) covering the scope of bidding products (valve type (butterfly valve), temperature, caliber, and pound class) when bidding. Foreign manufacturers should provide the same supporting documents as domestic manufacturers. If the bidder is unable to provide the TS certificate of the foreign manufacturer during the bidding process, a written commitment letter must be provided during the bidding process. The commitment content is to provide a certificate of valve origin before supply and a TS certificate (special equipment production license) before May 31, 2024. The format of the commitment letter is detailed in Annex 17.?(3)功績具體要求Requirement for Bidder's reference:2010年1月1日起至投標截至日(以較為條約進行簽訂時段加以為準),投標產品製造商應具備中邊界內老鼻子於2個LNG接受站或具備接受站自然界的(即符合GB51156-2015氧化自然氣接受站工程設計符合規範)調峰站具體項目(需給予符合GB51156-2015氧化自然氣接受站工程設計符合規範2.0.2氧化自然氣接受站:對船運氧化自然氣開展接受、存儲、電氣化和外輸等工作的場站因素的證明書材料,證明書材料借助國度發改委、副縣級發改委、當局網站、具體項目所有主官網等政府網站進行調查,以打印印把子的截圖片式給予)的超低溫或超超低溫蝶閥供貨功績(具體要求2個具體項目功績,相同具體項目給予老鼻子較為條約便是其中一個功績)。且在這當中起碼1個功績與此同時包含如下具體內容:1)超低溫或超超低溫蝶閥數額老鼻子於10台(套),且2)包括老鼻子於2台42寸及上述且磅級≥150磅的超低溫或超超低溫蝶閥。From January 1, 2010 to the bidding deadline (based on the date of contract signing), The bidding product manufacturer should have at least 2 LNG receiving station projects within China or peak shaving station projects with receiving station characteristics (i.e. meeting GB51156-2015 Liquefied Natural Gas Receiving Station Engineering Design Specification) (Proof materials that meet the requirements of GB51156-2015 Design Specification for Liquefied Natural Gas Terminal Engineering 2.0.2 Liquefied Natural Gas Terminal: The site elements for receiving, storing, gasifying, and exporting liquefied natural gas transported by ships must be provided. The proof materials can be found on official websites such as the National Development and Reform Commission, provincial-level Development and Reform Commission, government websites, and project owners' official websites, and provided in the form of screenshots stamped with official seals.) (Two project performances are required, and providing multiple contracts for the same project is considered one performance). And at least one of the performance includes the following content: ①The number of low or ultra-low temperature butterfly valves shall not be less than 10 sets at least; ② At least contains 2 sets 42" and and ≥ CL150 low or ultra-low butterfly valve.投標人須按明確要求說明書正式提交功績表,持續並提交與此相關功績證明書文獻。功績證明書文獻包含但不禁止:1)對外銷售較為條約【或】對外銷售定單【車架議定書下的定單(需給予主車架議定書)】打印件(含與此相關技術備件)和2)到會驗光材料。?投標人所正式提交的功績證明書文獻一定要起碼反映這陣兒具體內容:較為條約進行簽訂時段、製造商具體稱謂、貨色具體稱謂、具體項目具體稱謂、供貨數額、規格型號(標準、磅級及整體結構模式(頂裝/側頂裝))、到會驗光材料。如給予的是調峰站功績,投標人還需給予調峰站(符合GB51156-2015氧化自然氣接受站工程設計符合規範2.0.2氧化自然氣接受站:對船運氧化自然氣開展接受、存儲、電氣化和外輸等工作的場站)因素的證明書材料,證明書材料借助國度發改委、副縣級發改委、當局網站、具體項目所有主官網等政府網站進行調查,以打印印把子的截圖片式給予。未正式提交功績證明書文獻,或所給予的功績證明書文獻未反映以上相關信息的,均便是較為空空功績。此次投標人給予的製造商業領域績整體結構模式(頂裝/側頂裝)一定要與投標產品的整體結構模式保持一致。The Bidder shall furnish reference List in given form, and provide corresponding documentary evidence. The documentary evidence shall include but not limited to:1)?Copy of sales contract [or] sales order [orders under framework agreement (main framework agreement required)] (including relevant technical attachments) and?2)?Acceptance materials upon arrival.The performance certification documents submitted by the bidder must at least reflect the following contents: contract signing time, manufacturer's name, goods name, project name, supply quantity, specifications and models (caliber, weight level, and structural type (top mounted/side top mounted)), and acceptance materials upon arrival. If the performance of the peak shaving station is provided, the bidder also needs to provide proof materials for the elements of the peak shaving station (which meets the requirements of GB51156-2015 Design Specification for Liquefied Natural Gas Terminal Engineering 2.0.2 Liquefied Natural Gas Terminal: a station for receiving, storing, gasifying, and exporting liquefied natural gas transported by ships). The proof materials can be found on official websites such as the National Development and Reform Commission, provincial-level Development and Reform Commission, government websites, and project owner websites, Provide in the form of a screenshot stamped with the official seal. Failure to submit performance proof documents or failure to reflect the above information in the provided performance proof documents shall be deemed as invalid performance. The manufacturer's performance structural type (top mounted/side top mounted) provided by the bidder must be consistent with the structural type of the bidding product.(4)其他具體要求及證明書文獻Other Requirements of Qualification of Bidder?and Certificate投標人應給予投標產品製造商這陣兒切實有效證明證明書打印件,全部證明書證明的製造商具體稱謂應與其說所給予功績的製造商、這下子投標貨色的製造商保持一致。The bidder shall provide copies of the type certifications of the manufacturer when bidding. And the name of the certificates shall be the same with the manufacture of References and the manufacture of the bidding Goods.?①防水證明書:投標產品製造商應具備全球範圍或中國大陸證明單位進行頒給的包含在相應範圍之內投標產品適用範圍【閥阿彌陀佛型(蝶閥)、標準及磅級】的 API607 或 API6FA 或 ISO10497 或BS EN12266或平等規範標準的防水證明書,並附認為的進行測試曉以大義。Fire safe certification:The manufacturer of the bidding product should have an API607 or API6FA or ISO10497 or BS EN12266 or equivalent fire prevention certificate issued by an international or domestic certification agency covering the scope of the bidding product [valve type (butterfly valve), caliber, and pound class], and attach the corresponding test report.?②低泄露證明證明書:閥門一定要具有值得信賴的外密封使用性能,應起碼實現 ISO 15848-1 的具體要求。投標產品製造商應具備可以包含在相應範圍之內此次投標適用範圍【閥阿彌陀佛型(蝶閥)、熱度、標準及磅級】的 ISO 15848 PART 1 證明書,並附認為的(de)進行測試曉以大義。Low leakage certification certificate: Valves must have reliable external sealing performance and meet at least the requirements of ISO 15848-1. The bidding product manufacturer should have an ISO 15848 Part 1 certificate that can cover the scope of this bidding [valve type (butterfly valve), temperature, diameter, and pound class], and attach the corresponding test report.?③投標產品製造商應給予要樣兒相關數值表中有SIL等級提升的電門閥從整體上看的SIL2及上述證明書,或是各自給予閥體、落實單位、電磁學閥的SIL2及上述證明書,投標時需予以確認落實單位和電磁學閥的品牌名稱名冊(其中一個或老鼻子),每張品牌名稱都要給予與之對應的SIL證明書,並保障所供產品的(de)品牌名稱與投標名冊保持一致。進行頒給SIL證明書的證明單位應是國度認監委認同的證明單位或全球範圍權威老三方單位,如TUV、Exida、BV、DNV、SIRA等。The manufacturer of the bidding product should provide SIL2 and above certificates for the overall switching valve with SIL level in the instrument data sheet, or provide SIL2 and above certificates for the valve body, actuator, and solenoid valve respectively. When bidding, it is necessary to ensure the brand list (one or more) of the actuator and solenoid valve, each brand must provide a corresponding SIL certificate?and ensure that the brand of the supplied product is consistent with the bidding list. The certification body issuing the SIL certificate should be a certification body recognized by the National Certification and Accreditation Administration or an internationally authoritative third-party organization, such as TUV, Exida, BV, DNV, SIRA, etc.?④投標產品製造商應給予本安型閥門固定器、隔爆型電磁學閥、隔爆型限位電門的中國國度進行核準防水證明單位進行頒給的(de)產品防水符合標準證和CCC證明證明書,投標時需予以確認本安型閥門固定器、隔爆型電磁學閥、隔爆型限位電門的品牌名稱名冊(其中一個或老鼻子),每張品牌名稱都要給予與之對應的CCC證明證明書,並保障所供產品的品牌名稱與投標名冊保持一致。The bidding product manufacturer shall provide the Intrinsically Safe Valve Positioner, explosion-proof qualification certificate and CCC certification certificate issued by the Chinese national authorized explosion-proof certification agency for explosion-proof solenoid valves and explosion-proof limit switches. When bidding, it is necessary to ensure the brand list (one or more) of Intrinsically Safe Valve Positioner, explosion-proof solenoid valves and explosion-proof limit switches, each brand must provide a corresponding CCC certification certificate?and ensure that the brand of the supplied products is consistent with the bidding list.有沒有進行接管統一體投標:不進行接管未領購投標文獻有沒有能夠參與投標:使不得以4、
尚未在中國核動力投標進行采購網(www.zhuliyuan.com.cn)上計數器社員的(de)機構應先計數器。計數器取得成功後依據投標通知書的相闡明下載投標文獻!

具體項目 取得聯係人:李楊  
提供谘詢電話:010-51957458 
進行電傳:010-51957412 
部手機:13683233285 
QQ:1211306049 
微信:Li13683233285 郵箱:1211306049@qq.com

備考:欲選購投標文獻的秘密投標人,計數器網站並進行薪資因特網技術服務費後,檢查具體項目所有主,投標通知書,中標出風頭等,並載入輩數兒原審適用範圍,資格條件具體要求,投標列表索引,申請提出申請表等。為確保您可以較為順當投標,混凝土具體要求及選購標書進行操作操作流程按通知書更加具體具體內容加以為準,以投標所有主的答道加以為準本。

修改:chinabidding.co
 
進行報告進行匯編 0打賞 0
 
數量更多>差不離資訊
  • dlztb007
    加持續關注7
  • 投標立刻就進行首先。。。
優先推薦圖文
新式投標資訊
國度可用能源資訊
網站首頁  |  電碼索回  |  服務作出說明  |  入藥議定書  |  銀行家匯款  |  聯係信息  |  關於我們  |  使用者議定書  |  隱衷方針  |  著作權公告  |  網站地圖  |  排名榜進行推廣  |  網站進行通訊  |  違紀進行報告  |  京ICP備12017752號-8  |  11010702002406號
 
天堂视频-69av天堂在线-亚洲天堂av网-天堂影视app官方版