投標通知書
第六章 投標三顧茅廬
Section 5.Invitation for Bids
投標具體項目
Project Name: Downhole Electronic Pressure Gauge and Services for Bohai Oilfield
投標號碼(Bid No.):0704-2340JDCP1691/01
日 期:2023年8月15日
Date : 15th August, 2023
中化建全球範圍 (這陣兒進行稱號“投標辦事處單位”)受中海原油(中國) 天津 (這陣兒進行稱號“投標人”)寄托,就渤海稠油田價電子壓強計及服務具體項目所需貨色及與此相關服務開展全球範圍著名投標。現三顧茅廬投標人對進行下麵貨色和服務正式提交密封投標:
CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted by CNOOC China Limited, Tianjin Branch (hereinafter referred to as “Tenderee” ), intends to purchase the Downhole Electronic Pressure Gauge and Services for Bohai Oilfield by International Competitive Bidding. Bidders are kindly requested to provide the following Goods and services with sealed bids.
1. 投標具體條件(Bidding Conditions)
具體項目大概:此次所需進行采購產品為井下直讀式永遠價電子熱度壓強計,這陣兒進行縮寫價電子壓強計,采用環境為海上石油氣田。
Project Summary:The product to be purchased this time is downhole direct reading permanent Electron temperature pressure gauge, hereinafter referred to as electronic pressure gauge, which is used in offshore oil and gas fields..
資本落實到位或資本策源地按照要求具體執行狀況:已按照要求具體執行。
Source of Funds: yes
具體項目已具有投標具體條件的作出說明:已具有。
Description of Prepared Bidding Conditions: yes
2. 投標具體內容(Bidding Contents)
貨色
Name of Goods: Downhole Electronic Pressure Gauge and Services
預測數額:價電子壓強計70支。在這當中150℃耐溫40支、175℃耐溫20支、200℃耐溫10支。
Estimated Quantity: 70 electronic pressure gauges. Among them, 40 pieces are resistant to temperature at 150 ℃, 20 pieces are resistant to temperature at 175 ℃, and 10 pieces are resistant to temperature at 200 ℃.
重點技術規格:
1.★熱度國別
此次所需價電子壓強計耐溫等級提升為150℃、175℃、200℃關於三個國別,熱度為耐井液熱度。
2.★感壓部件材料具體要求
價電子壓強計的井下傳感器感壓部件材料具體要求為石英。
3.★檢測相關數值具體要求
熱度進行測量適用範圍為:0-150℃、0-175℃、0-200℃關於三種;
熱度精確程度:進行測量錯誤最小於0.2℃;
熱度分離率:0.1℃;
熱度保持穩定性:年漂浮量最小於0.2攝氏度度;
壓強進行測量適用範圍: 0-10000psi;
壓強精確程度: 進行測量錯誤最小於3.5psi;
壓強分離率:0.1psi;
壓強保持穩定性:年漂浮量最小於3.5psi。
4.★價電子壓強計的挑選具體要求
因海上稠油田鑽完井工作高難度大、檢修費用成本高,為確保價電子壓強的長時間保持穩定正常運轉,此次所投價電子壓強計具體要求挑選全球範圍參加的較為完善產品(優先推薦品牌名稱:OMEGA、GEO、SCHLUMBERGER、BAKERHUGHES)。投標人須錄取優先推薦品牌名稱或與優先推薦品牌名稱平等水準儀的其餘品牌名稱產品,挑選優先推薦品牌名稱外的其餘產品時,需給予該產品具有老鼻子於差不離型工況(采煤或采氣井具體項目)合計10支價電子壓強計下井的證明書文獻(包含較為條約證明書文獻和到會驗光文獻),證明書文獻一定要起碼反映這陣兒具體內容:較為條約首頁、簽章頁、較為條約進行簽訂時段、製造商具體稱謂、貨色具體稱謂、有較為條約所有主簽署或蓋章的到會驗光材料。
Main Specifications:
1. ★ The temperature resistance level of the electronic pressure gauge required for this time is 150 ℃, 175 ℃, and 200 ℃, and the temperature is the temperature resistance of the well fluid.
2. ★ The material requirement for the pressure sensing component of the underground sensor of the electronic pressure gauge is quartz.
3. ★ Monitoring data requirements
The temperature measurement range is: 0-150 ℃, 0-175 ℃, 0-200 ℃;
Temperature accuracy: measurement error not greater than 0.2 ℃;
Temperature resolution: 0.1 ℃;
Temperature stability: annual drift not exceeding 0.2 degrees Celsius;
Pressure measurement range: 0-10000psi;
Pressure accuracy: measurement error shall not exceed 3.5psi;
Pressure resolution: 0.1psi;
Pressure stability: The annual drift shall not exceed 3.5psi.
4. ★ Selection requirements for electronic pressure gauges
Due to the high difficulty and maintenance cost of drilling and completion operations in offshore oil fields, in order to ensure the long-term stable operation of electronic pressure, the electronic pressure gauge used in this investment requires the selection of internationally recognized and mature products (recommended brands: OMEGA, GEO, SCHLUMBERGER, BAKERHUGHES). Bidders are required to choose recommended brands or other brands of products of the same grade as the recommended brands. When selecting products other than the recommended brands, they must provide proof documents (including contract proof documents and arrival acceptance documents) that the product has a total of 10 electronic pressure gauges in the same type of working conditions (oil or gas well projects well project). The proof documents must fully prove that the bidding product meets the above requirements. The supporting documents must at least contain the following contents: contract homepage, signature page, contract signing time, manufacturer's name, goods name, and arrival acceptance materials signed or sealed by the contract owner.
★ 寄遞期:
Delivery Schedule:
居中中國人民共和國關境內給予的(de)貨色:接受投標人發表後90天內寄遞(貨到具體項目工作現場時段)For goods offered from within PRC customs territory:within 90 days from the date of notification by the Tenderee, and the specific delivery date shall be subject to the written notification of the Tenderee(arrival date to the job site)
居中中國人民共和國關境外給予的貨色: 接受投標人發表後75天內寄遞(貨到進行指派海港時段)
For goods offered from outside PRC customs territory: within 75 days from the date of notification by the Tenderee, and the specific delivery date shall be subject to the written notice of the Tenderee(arrival date to the port)
寄遞所在地Destination of delivery:
居中中國人民共和國關境內給予的貨色:天津塘沽生產基地貨棧
For goods offered from within PRC customs territory: Warehouse at the Tanggu base, Tianjin.
居中中國人民共和國關境外給予的貨色: DAP天津航空港/天津新港/天津東疆港
For goods offered from outside PRC customs territory: DAP Tianjin airport/ Tianjin Xingang seaport/ Tianjin Dongjiang seaport (INCOTERMS2010)
3. ★對投標人的輩數兒和功績具體要求:
Requirements for Qualification and reference of Bidder:
(1)輩數兒具體要求 Requirements for Qualification of Bidder
A.★在滿足相關條件時投標人工境內計數器公司,投標人需給予法定切實有效的企業保證人運營授權、稅捐計數器證及安排單位源代碼證或證照統一的運營授權;
在滿足相關條件時投標人工境外計數器公司,需給予切實有效的公司計數器計數器證明書;
窗體上麵
窗體底端
A.The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;
The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.
B. ★給予與產品與此相關的HSE和品質管控進行管理次序。投標人所加以投產品的(de)製造商須給予切實有效的ISO9001質量體係證明證明書、ISO14001環境進行管理體係證明證明書、OHSAS18001或ISO45001 工作崗位保持健康進行管理體係證明證明書。投標人須給予製造商切實有效的體係證明證明書,複製件複查;
B.The manufacturer of the Bid Goods shall pass ISO9001Certification for Quality Management System,ISO45001 Certification for Occupational Health and Safety Management System,and OHSAS18001/ISO14001 Certification for Environmental Management System. Bidder shall provide valid Certificate of all Management System Certification of manufacturer,and keep the orginal certifications for future inspetction.
C.★(進行接管辦事處)
(1)在滿足相關條件時投標人工辦事處商,投標人應取得貨色製造商可以其在中國給予該貨色的(de)法定左不過進行核準;
(2)投標人以其自行製造的貨色積極參與投目的物,無法再將此貨色與此同時進行核準給其餘投標如意人生與投標,不然與此相關的全部投標均將被不肯;
(3)投標人將被進行核準的(de)貨色再進行核準給其餘投標人與此同時積極參與投標,與此相關的全部投標將被不肯。
(4)投標貨色為中邊界內(指海關關境內,持續下同)品牌名稱或中邊界內生產製造的,不進行接管辦事處商投標。
(1) If the bidder is an agent, the bidder shall obtain the legal and exclusive authorization of the goods manufacturer to provide the goods in China;
(2) If a bidder participates in the bidding with goods manufactured independently, they cannot authorize other bidders to participate in the bidding at the same time, otherwise all related bids will be rejected;
(3) The bidder will re authorize the authorized goods to other bidders and participate in the bidding, and all related bids will be rejected.
(4) If the bidding goods are of a brand within China (referring to customs territory, the same below) or produced and manufactured within China, agents will not be accepted for bidding.
D. 有沒有進行接管統一體投標:否
Joint Venture: Not Accepted
E. 未領購投標文獻有沒有能夠參與投標:使不得以
Bid without the bidding documents:NOT A/Vailable
(2)★功績具體要求Requirement for Bidder's reference:
2018年1月1日至投標截至日(以較為條約進行簽訂時段加以為準),投標人起碼應具備差不離型整套價電子壓強計在差不離型工況(采煤或采氣井具體項目)具體條件下,老鼻子於2個具體項目且合計數額老鼻子於10支的供貨功績及下井服務功績。每張具體項目一定要與此同時包括供貨功績和下井服務功績,供貨功績和服務功績在相同較為條約內或進行劃成關於兩個較為條約,均便是其中一個具體項目功績。
From January 1, 2018 to the bidding deadline (based on the contract signing date), bidders should hA/Ve supply performance and downhole service performance on at least two projects of the same type of complete electronic pressure gauge under the same working conditions (oil or gas well projects), and a cumulative quantity of no less than 10 pieces. Each project must include both supply performance and downhole service performance. If the supply performance and service performance are included in the same contract or divided into two contracts, they are considered as one project performance.
投標人須按明確要求說明書正式提交功績表,持續並提交與此相關功績證明書文獻。功績證明書文獻包含但不禁止:1)較為條約首頁,簽章頁;2)貨色較為條約功績需給予使用者簽署或蓋章的到會驗光材料;服務較為條約功績需給予使用者簽署或蓋章的服務驗光單。投標人所正式提交的功績證明書文獻一定要起碼反映這陣兒具體內容:較為條約進行簽訂時段、製造商具體稱謂、貨色具體稱謂到會驗光材料和服務驗光單。
The Bidder shall furnish reference List in given form, and provide corresponding documentary evidence. The documentary evidence shall include but not limited to: 1) copies of contract homepage, signature page; and 2) Acceptance documents of arrival of goods signed or sealed by the user, and acceptance documents of services signed or sealed by the user. The reference evidence certification furnished by Bidder shall as least demonstrate the content show as follows: Date of signing contract, name of manufacturer, name of Goods, acceptance documents of arrival of goods and acceptance documents of services.
未正式提交功績證明書文獻,或所給予的功績證明書文獻束手無策反映較為條約進行簽訂時段、製造商具體稱謂、貨色具體稱謂及到會驗光材料和服務驗光單的,均便是較為空空功績。
If no documentary evidence furnished, or documentary evidence furnished can not demonstrate Date of signing Contract, name of manufacturer, name of Goods, acceptance documents of arrival of goods and services, the relevant reference will be deemed invalid.
4. 有勺口兒的投標人可借助這陣兒方法得到投標文獻:從2023年8月15日進行首先至2023年8月22日止,請計數器中國海油購買業務範圍進行管理與貿易係統(https://buy.cnooc.com.cn)的投標通知書頁麵開展選購。頭一回計數器一定要較為先進行計數器(免費教育),計數器取得成功後,可以 投標人須在線填空 投標文獻出售花消可用於進行打印和作為投標文獻,有作為實際需要的請在進行繳納時備考收件人與此相關相關信息。投標文獻有關每套零售價為200元普通人幣或30美金,售後不退。針對采用美金
The interested Bidders may obtain the bidding document by following method: Please login at CNOOC Procurement Operation System on the page of Invitation for bid for purchasing Bidding document from 15th August, 2023 to 22ed August,2023. For the first time of login, a registration (free of charge) is needed and only after successful registration, Bidder can purchase Bidding documents online.The bidder shall fill in the registration form for purchasing bidding documents online and pay online. After successful payment, the bidder can download the bidding documents by itself. The selling fee for the bidding documents is used for printing and mailing the bidding documents. If there is a mailing requirement, please note the recipient's relevant information when making the payment.The price of each set of bidding documents is RMB200 or USD30, and it is non refundable after sales. For the bidder who purchases the bidding documents in US dollars, it is required to wire transfer to the following account number:
Payee:CNCCC International Tendering Co., Ltd.
Bank:INDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch:
Account:0200000709117000351;
SWIFT CODE: ICBKCNBJBJM,
Bank Address:No. 237 Wang fu jing Street, Dongcheng District, Beijing, China PR,100006.
5. 投標文獻的(de)遞給 Submission of bid
投標結束時間(開標時段): 2023年9月5日前半晌10點整
The deadline for submission of bid(bid opening time):10am at 5th September, 2023
投標文獻達到
Any bid beyond the required time and date shall be subject for rejection.
6. 。
This Invitation for Bids will be published on the website at the same time.
7.投標人在投標前應在必聯網(https:// ooc.com.cn)上公布。
Before bidding, the bidder should complete registration and information verification at https:// ooc.com.cn) .
8.
尚未在中國核動力投標進行采購網(www.zhuliyuan.com.cn)上計數器社員的機構應先計數器。計數器取得成功後依據投標通知書的相作出說明載入投標文獻!具體項目 取得聯係人:李楊
提供谘詢電話:010-51957458
進行電傳:010-51957412
部手機:13683233285
QQ:1211306049
微信:Li13683233285 郵箱:1211306049@qq.com
備考:欲選購投標文獻的秘密投標人,計數器網站並進行薪資因特網技術服務費後,檢查具體項目所有主,投標通知書,中標出風頭等,並載入輩數兒原審適用範圍,資格條件具體要求,投標列表索引,申請提出申請表等。為確保您可以較為順當投標,混凝土具體要求及選購標書進行操作操作流程按通知書更加具體具體內容加以為準,以投標所有主的答道加以為準本。
策源地:中國核動力投標進行采購網 修改:cnooc
